NEUMANN

Choose other product

Acoustical operating principle	Pressure transducer
Directional Pattern	Hemispherical
Frequency Range	20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm	18 mV/Pa
Rated Impedance	50 Ohms
Rated load impedance	1000 Ohms
Equivalent noise level, A-weighted ¹	14 dB-A
Maximum SPL for THD 0.5% ²	137 dB
Maximum SPL for THD 0.5% with preattenuation ³	147 dB
Signal-to-noise ratio, CCIR (re. 94 dB SPL) ⁴	70 dB
Signal-to-noise ratio, A-weighted (re. 94 dB SPL) ⁵	80 dB
Maximum output voltage	10 dBu
Supply voltage (P48, IEC 61938)	48 V ± 4 V
Current consumption (P48, IEC 61938)	2 mA
Matching connector	XLR 3 F
Weight	460 g
Diameter	213 mm
Length	168 mm

1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

2) measured as equivalent el. input signal

3) measured as equivalent el. input signal

4) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

5) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

Downloads can be found here.

WARNING (for California residents only): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects and other reproductive harm. For more information go to: www.p65warnings.ca.gov.